Hello world! – Pitambara Engineering

During installation, tank shuld be completely empty.
There should be no objects which shall hinder the float.
Ensure that the float position inside the tank should be such that agitation on it will be minimum.
The position of mounting nozzle should be far away from the liquid fill pipe to protect the float from damage and faulty readings due to turbulence.
Ensure that tank structures / fittings do not come in the way of calibrated gauges boards
Instruments required- Welding machine, combination/crimping plier, spanner and adjustable.

Even with large changes in liquid density, the immersion of a large diameter float will change very little, thus density has little effect on accuracy.
Float systems are simple and easily understood.
Even if the primary requirement is the transmitted signal, local indicators can continue to operate, even on loss of power.